trim controller - перевод на русский
Diclib.com
Словарь ChatGPT
Поиск в словаре Индивидуальные решения
Введите слово или словосочетание на любом языке 👆
Язык:

Перевод и анализ слов искусственным интеллектом ChatGPT

На этой странице Вы можете получить подробный анализ слова или словосочетания, произведенный с помощью лучшей на сегодняшний день технологии искусственного интеллекта:

  • как употребляется слово
  • частота употребления
  • используется оно чаще в устной или письменной речи
  • варианты перевода слова
  • примеры употребления (несколько фраз с переводом)
  • этимология
  1. Словари
  2. Англо-русский словарь
  3. trim controller

trim controller - перевод на русский

SMALL SURFACES CONNECTED TO THE TRAILING EDGE OF A LARGER CONTROL SURFACE ON A BOAT OR AIRCRAFT, USED TO CONTROL THE TRIM OF THE CONTROLS
Trim tabs; Vertical trim; Stabilizer trim; Trim wheel
  • Grave of Buckminster Fuller with the quote "Call me Trimtab"
  • The center console of a small airplane. The vertical black wheel with spherical bumps is the trim-tab control. Moving it upwards changes the 'hands-off' elevator position to a more nose-down position; moving it downwards does the reverse.
  • page=6-11}}</ref>
  • elevator}}. Aileron and rudder trim tabs are not very common on light training aircraft.
  • Center console on an airliner. The black and white marked wheels are for (usually automated) trim control
Найдено результатов: 235
trim controller      

общая лексика

автомат балансировки

disk controller         
CONTROLLER FOR DISK STORAGE, USUALLY INTEGRATED INTO THE DRIVE
Hard disk controller; Hard drive controller; HD controller; Drive controller

общая лексика

дисковый контроллер, контроллер диска

плата расширения и/или микросхема, обеспечивающая взаимодействие процессора с дисковым накопителем

PID controller         
  • Showing the evolution of analog control loop signaling from the pneumatic to the electronic eras
  • Response of PV to step change of SP vs time, for three values of ''K''<sub>d</sub> (''K''<sub>p</sub> and ''K''<sub>i</sub> held constant)
  • Response of PV to step change of SP vs time, for three values of ''K''<sub>i</sub> (''K''<sub>p</sub> and ''K''<sub>d</sub> held constant)
  • Proportional control using nozzle and flapper high gain amplifier and negative feedback
  • Effects of varying PID parameters (K<sub>p</sub>,K<sub>i</sub>,K<sub>d</sub>) on the step response of a system
  • A [[block diagram]] of a PID controller in a feedback loop. ''r''(''t'') is the desired process value or setpoint (SP), and ''y''(''t'') is the measured process value (PV).
  • PID with derivative filtering
  • PID without derivative filtering
  • Response of PV to step change of SP vs time, for three values of ''K''<sub>p</sub> (''K''<sub>i</sub> and ''K''<sub>d</sub> held constant)
  • Basic block of a PI controller
  • alt=
  • Early PID theory was developed by observing the actions of [[helmsmen]] in keeping a vessel on course in the face of varying influences such as wind and sea state.
  • Current loops used for sensing and control signals. A modern electronic "smart" valve positioner is shown, which will incorporate its own PID controller.
CONTROL LOOP MECHANISM USED IN CONTROL ENGINEERING
PID loop; Proportional-Integral-Derivative controller; PID tuning; PID algorithm; Proportional integral derivative; PI controller; PD controller; PID control; PI Controller; Pi controller; Pidc; PID Controller; Proportional–integral–derivative controller; P.I.D. control; Droop (control); Proportional-integral-derivative controller; PID feed back controller; PID feedback controller; Three term controller; Steady-state error
ПИД-регулятор, пропорционально-интегральный (изодромный) регулятор с предварением
three term controller         
  • Showing the evolution of analog control loop signaling from the pneumatic to the electronic eras
  • Response of PV to step change of SP vs time, for three values of ''K''<sub>d</sub> (''K''<sub>p</sub> and ''K''<sub>i</sub> held constant)
  • Response of PV to step change of SP vs time, for three values of ''K''<sub>i</sub> (''K''<sub>p</sub> and ''K''<sub>d</sub> held constant)
  • Proportional control using nozzle and flapper high gain amplifier and negative feedback
  • Effects of varying PID parameters (K<sub>p</sub>,K<sub>i</sub>,K<sub>d</sub>) on the step response of a system
  • A [[block diagram]] of a PID controller in a feedback loop. ''r''(''t'') is the desired process value or setpoint (SP), and ''y''(''t'') is the measured process value (PV).
  • PID with derivative filtering
  • PID without derivative filtering
  • Response of PV to step change of SP vs time, for three values of ''K''<sub>p</sub> (''K''<sub>i</sub> and ''K''<sub>d</sub> held constant)
  • Basic block of a PI controller
  • alt=
  • Early PID theory was developed by observing the actions of [[helmsmen]] in keeping a vessel on course in the face of varying influences such as wind and sea state.
  • Current loops used for sensing and control signals. A modern electronic "smart" valve positioner is shown, which will incorporate its own PID controller.
CONTROL LOOP MECHANISM USED IN CONTROL ENGINEERING
PID loop; Proportional-Integral-Derivative controller; PID tuning; PID algorithm; Proportional integral derivative; PI controller; PD controller; PID control; PI Controller; Pi controller; Pidc; PID Controller; Proportional–integral–derivative controller; P.I.D. control; Droop (control); Proportional-integral-derivative controller; PID feed back controller; PID feedback controller; Three term controller; Steady-state error

строительное дело

ПИД-регулятор, пропорционально-интегральный (изодромный) регулятор с предварением

three term controller         
  • Showing the evolution of analog control loop signaling from the pneumatic to the electronic eras
  • Response of PV to step change of SP vs time, for three values of ''K''<sub>d</sub> (''K''<sub>p</sub> and ''K''<sub>i</sub> held constant)
  • Response of PV to step change of SP vs time, for three values of ''K''<sub>i</sub> (''K''<sub>p</sub> and ''K''<sub>d</sub> held constant)
  • Proportional control using nozzle and flapper high gain amplifier and negative feedback
  • Effects of varying PID parameters (K<sub>p</sub>,K<sub>i</sub>,K<sub>d</sub>) on the step response of a system
  • A [[block diagram]] of a PID controller in a feedback loop. ''r''(''t'') is the desired process value or setpoint (SP), and ''y''(''t'') is the measured process value (PV).
  • PID with derivative filtering
  • PID without derivative filtering
  • Response of PV to step change of SP vs time, for three values of ''K''<sub>p</sub> (''K''<sub>i</sub> and ''K''<sub>d</sub> held constant)
  • Basic block of a PI controller
  • alt=
  • Early PID theory was developed by observing the actions of [[helmsmen]] in keeping a vessel on course in the face of varying influences such as wind and sea state.
  • Current loops used for sensing and control signals. A modern electronic "smart" valve positioner is shown, which will incorporate its own PID controller.
CONTROL LOOP MECHANISM USED IN CONTROL ENGINEERING
PID loop; Proportional-Integral-Derivative controller; PID tuning; PID algorithm; Proportional integral derivative; PI controller; PD controller; PID control; PI Controller; Pi controller; Pidc; PID Controller; Proportional–integral–derivative controller; P.I.D. control; Droop (control); Proportional-integral-derivative controller; PID feed back controller; PID feedback controller; Three term controller; Steady-state error
ПИД-регулятор, пропорционально-интегральный (изодромный) регулятор с предварением
PID controller         
  • Showing the evolution of analog control loop signaling from the pneumatic to the electronic eras
  • Response of PV to step change of SP vs time, for three values of ''K''<sub>d</sub> (''K''<sub>p</sub> and ''K''<sub>i</sub> held constant)
  • Response of PV to step change of SP vs time, for three values of ''K''<sub>i</sub> (''K''<sub>p</sub> and ''K''<sub>d</sub> held constant)
  • Proportional control using nozzle and flapper high gain amplifier and negative feedback
  • Effects of varying PID parameters (K<sub>p</sub>,K<sub>i</sub>,K<sub>d</sub>) on the step response of a system
  • A [[block diagram]] of a PID controller in a feedback loop. ''r''(''t'') is the desired process value or setpoint (SP), and ''y''(''t'') is the measured process value (PV).
  • PID with derivative filtering
  • PID without derivative filtering
  • Response of PV to step change of SP vs time, for three values of ''K''<sub>p</sub> (''K''<sub>i</sub> and ''K''<sub>d</sub> held constant)
  • Basic block of a PI controller
  • alt=
  • Early PID theory was developed by observing the actions of [[helmsmen]] in keeping a vessel on course in the face of varying influences such as wind and sea state.
  • Current loops used for sensing and control signals. A modern electronic "smart" valve positioner is shown, which will incorporate its own PID controller.
CONTROL LOOP MECHANISM USED IN CONTROL ENGINEERING
PID loop; Proportional-Integral-Derivative controller; PID tuning; PID algorithm; Proportional integral derivative; PI controller; PD controller; PID control; PI Controller; Pi controller; Pidc; PID Controller; Proportional–integral–derivative controller; P.I.D. control; Droop (control); Proportional-integral-derivative controller; PID feed back controller; PID feedback controller; Three term controller; Steady-state error

строительное дело

ПИД-регулятор, пропорционально-интегральный (изодромный) регулятор с предварением

floppy-disk controller         
  • A setup disk of Japanese [[Microsoft Office]] 4.3, provided with 3.5" 1.2&nbsp;MB and 1440&nbsp;KB formats.
CIRCUITRY THAT CONTROLS READING FROM AND WRITING TO A COMPUTER'S FLOPPY DISK DRIVE
Floppy Disk Controller; Intel 82072A; Intel 82072; NEC µPD765; NEC uPD765; Floppy controllers; 3 mode; 3-mode; 3mode; Floppy disk controller; NEC D765; NEC 765; NEC 765A; NEC D765A; NEC µPD765A; ΜPD765; ΜPD765A; NEC uPD765A; UPD765; UPD765A; D765A; Intel 8072A; NEC μPD765; NEC μPD765A; Floppy controller; FDC controller; Philips interface bus; Floppy diskette controller; Diskette controller; Floppy disk drive controller; 2HC

общая лексика

контроллер НГМД

air controller         
  • Civilian air traffic controllers, [[Memphis International Airport]], 1962
  • Controllers often work from a control tower like this one at [[Birmingham Airport]], England
  • 6}} (CVN-72).
SPECIALIST RESPONSIBLE FOR THE SAFE, ORDERLY, AND EXPEDITIOUS FLOW OF AIR TRAFFIC
Air Traffic Controller; Air-traffic controller; Air traffic controllers; Air Traffic Controllers; Air Traffic Control Officer; Final Director; Control Tower Operator; Control Tower Operators; Tower controller; Local controller; Air traffic control officer; Air controller

['eəkəntrəulə]

синоним

air-traffic controller

trim         
WIKIMEDIA DISAMBIGUATION PAGE
Troim; Trimming; Trim (disambiguation); Trims; TRIM; Trimmings
1) осадка
2) дифферент
3) удифферентовать
4) размещать (груз на судне)
trimming         
WIKIMEDIA DISAMBIGUATION PAGE
Troim; Trimming; Trim (disambiguation); Trims; TRIM; Trimmings
1) обрезка кромок
2) отделка насыпей и выемок
3) фрезерование (образца грунта)
4) окончательная (тонкая) регулировка

Определение

disk controller
<hardware, storage> (Or "hard disk controller", HDC) The circuit which allows the CPU to communicate with a {hard disk}, floppy disk or other kind of disk drive. The most common disk controllers in use are IDE and SCSI controllers. Most home personal computers use IDE controllers. High end PCs, workstations and network {file servers} mostly have SCSI adaptors. (1998-03-16)
Показать больше определений

Википедия

Trim tab

Trim tabs are small surfaces connected to the trailing edge of a larger control surface on a boat or aircraft, used to control the trim of the controls, i.e. to counteract hydro- or aerodynamic forces and stabilise the boat or aircraft in a particular desired attitude without the need for the operator to constantly apply a control force. This is done by adjusting the angle of the tab relative to the larger surface.

Changing the setting of a trim tab adjusts the neutral or resting position of a control surface (such as an elevator or rudder). As the desired position of a control surface changes (corresponding mainly to different speeds), an adjustable trim tab will allow the operator to reduce the manual force required to maintain that position—to zero, if used correctly. Thus the trim tab acts as a servo tab. Because the center of pressure of the trim tab is farther away from the axis of rotation of the control surface than the center of pressure of the control surface, the moment generated by the tab can match the moment generated by the control surface. The position of the control surface on its axis will change until the torques from the control surface and the trim surface balance each other.

https://en.wikipedia.org/wiki/Trim tab
Как переводится trim controller на Русский язык
Поиск в словаре
Все словари Английский словарь Англо-арабский словарь Англо-голландский словарь Англо-греческий словарь Англо-испанский словарь Англо-итальянский словарь Англо-немецкий словарь Англо-русский словарь Англо-французский словарь Арабский словарь Голландский словарь Греческий словарь Испанский словарь Итальянский словарь Итальянско-русский словарь Латинско-испанский словарь Латинско-португальский словарь Немецкий словарь Португальский словарь Португальско-русский словарь Русский словарь Французский словарь Французско-русский словарь
Создано ИИ
Английский Русский Испанский Португальский Немецкий Французский Греческий Голландский Итальянский Арабский
Язык интерфейса
Русский English Español Português Deutsch Français Ελληνικά Nederlands Italiano عربي
Контакты
Свяжитесь с нами



Конфиденциальность
Политика конфиденциальности